MiniScaff Trade Folding Towers - Width 0.78m Wide x 1.8m Long (6 ft x 2' 5")
2.6m (8'5") Working Height | 0.6m (1'10") Platform Height
NOTE: NOT to be confused with the DIY / Trade imports
9 key quality components that make our Mini Trade Folding Towers the best and safest on the market.
|Platform Hook With Safety Clip
Ridges for extra safety and grip, and the wire hook for extra safety.
Aluminium Casted latch for extra tight lock. Also used on Industrial Towers.
|Adjustable Leg & Wheel
Aluminium Casted Leg Nut, Threaded Industrial Leg, Also used on our Industrial Scaffold Towers. No Thin Tubes with holes here! These are 100% British made and Certified in the UK.
Conveniently sized for transport and manoeuvring. These fit nicely in an estate or small van, please call our sales team for advice if you are unsure.
|Hinge On Trade Tower
Industrial Hinge, with Pivot Plug. Makes erecting the tower very simple and smooth. Vital part of the tower, as the whole weight of the person and equipment depends on this! Check this when looking for your access solution.
Locking Elbow On Back - Large locking elbow, casted and made in the UK. 2 per back on the MIniscaff for Extra safety and security. This is another vital part of the tower, please check the spec of these, as there could be potential risks if they are not robust.
|Trade Tower Wheel
A trade 125mm Locking Castor. What we advertise is what you receive. Be aware misleading advertising is about! As you can see, these wheels carry their own certification.
Floating spigot, same as the industrial spec. for ease of erection, even for you fellow DIY'ers! This is erecting towers made simple. Other inferior products use one sized thin tube.
|Tower Frame Clip
Essential part of health and safety. Ours are robust Clips which are also on our Industrial range, and used by other quality brands (Youngmans). Please check these if you continue to shop for your tower, as other inferior models offer uncertified alternatives.
- Made from 50.8mm Diameter Tube – Inferior Imported DIY Towers have a 35mm – 40mm Diameter.
- Based on the robust industrial tower specification. We use the same Tube, Brace Hook & Platforms As our Industrial Towers
- 1 piece Folding toe-board set
- Base can be used alone, When you purchase your maximum Height, you can also place your platform in lower heights in increments of 250mm
- Complies to BS1139 (Part 3) 1994 BSEN 1004
- Quick and easy to erect!
- Fits easily into most small vans or estate cars.
- Colour coded braces for easy assembly (RED & BLUE)
- Very simple and Ideal if you are using the tower alone.
- This System Is not To Be confused with the inferior DIY Imports Online. We Produce Our Tower in London, And The Spec and Quality Of our towers cannot be beaten.
WE SUPPLY HANDRAIL AND KNEE RAIL BRACES ON EACH PLATFORM AS REQUIRED BY WORKING AT HEIGHT REGULATIONS.
|Components with this Tower|
|1.5m Folding Base Unit||1|
|1.5m Additional Frames||0|
|1m Additional Frames||0|
|1.8m Trap Door Platform||1|
|1.8m Red Horizontal Brace||2|
|2.1m Blue Diagonal Brace||0|
|Complete Folding Toe-Board Set||0|
|Fixed Standard Stabiliser||0|
|125mm Locking Castor (standard)||4|
|150mm Locking Castor with 250mm adjustable leg||4*|
|* Represents Additional item: 4x150mm Castor with 250mm Adjustable Legs upgrade = £149.99|
Retail Price: £445.99
Our Price: £225.00+vat
|Diameter of tube
Very very Important for the overall Stability of the Tower
|50mm Diameter||39mm Diameter|
|Diameter of braces
Very Important for the overall rigidity of the Tower
|50mm Diameter tube with colour coded brace hooks, as per industrial Scaffold Towers Spec||25mm Diameter tube|
|Frame structure||Fully welded as per Industrial Scaffold Towers spec||Metal bent over at ends|
|Frame Locks||2 x 50mm Heavy duty casting||None|
|Safe Working Load||275kg per platform, same high quality material and spec as an industrial Scaffold||various|